Moteur marin Caterpillar C32

Caractéristiques techniques

  • V-12, 4-Stroke-Cycle-Diesel
  • Emissions IMO/EPA Tier 2, EU Stage 3A IW, CCNR
  • Stage II, DnV clean
  • Displacement32.1 L (1958.8 cu. in.)
  • Rated Engine Speed2300
  • Bore145,0 mm (5,71 po)
  • Stroke162,0 mm (6,38 po)
  • AspirationTTA
  • GovernorÉlectronique
  • Cooling SystemÉchangeur thermique
  • Weight, Net Dry (approx)2 547 kg (5 615 lb)
  • Refill Capacity
  • Cooling System.80 L (21.1 gal)
  • Lube Oil System 138 L (36.5 gal)

Equipement basique du moteur

Air inlet system

  • Corrosion resistant sea water / separate circuitaftercooler, air
  • cleaner/fumes disposal system (closed)
  • Control System
  • Electronic governor, Mechanically Actuated Electronic
  • Unit Injection (MEUI) fuel system, A4 Electronic Control
  • Unit (ECU), programmable low idle, momentary
  • start/stop logic; ECU controlled prelube, cranking and cooldown

Système de refroidissement

  • Gear-driven centrifugal auxiliary sea water pump, gear
  • driven centrifugal jacket water pump, titanium plate heat
  • exchanger with coolant recovery system or keel cooler with expansion tank, engine oil cooler

Système fuel

Fuel priming pump, fuel transfer pump, fuel filter—RH or LH service